| Marca | Alphacool |
|---|---|
| Produttore | Aquatuning GmbH |
| serie | Eisbaer 360 CPU |
| colore | black |
| Numero modello articolo | 11286 |
| Supporto processore | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 771 (Socket J), Buchse 604, Socket 755, Buchse 940, Buchse AM2, Buchse AM2+, Buchse AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, Buchse G34 |
| Voltaggio | 12 Volt |
| Wattaggio | 4 watt |
| Le batterie sono incluse | No |
| Peso articolo | 3,03 Kilograms |
| Aggiornamenti software garantiti fino a | sconosciuto |
Novità: Paga in Contanti
Acquista online e paga in contanti nel punto vendita più vicino. Scopri di più
Compralo con
169,70€
Ricevilo 8 - 11 apr
Generalmente spedito entro 3-4 giorni
Prezzo totale:
Per visualizzare il nostro prezzo, aggiungi gli articoli al carrello.
Scegli gli articoli da acquistare insieme.
I clienti hanno anche visualizzato questi prodotti
Pagina 1 di 1 RicominciaPagina 1 di 1
Le recensioni migliori da altri paesi
Mark A. Robson
I use this to cool off my Intel 8700K in conjunction with Thermal Grizzly ...
Recensito negli Stati Uniti il 11 gennaio 2018
Sergi gomez del Bas
La mejor pieza del equipo!!
Recensito in Spagna il 29 luglio 2018
Mark Benson
I wasn't buying it because someone said it was good, or that it was cheaper than some 280mm ...
Recensito nel Regno Unito il 1 settembre 2017
Mark Benson
Recensito nel Regno Unito il 1 settembre 2017
Anyway I received the Eisbaer 360 through the post by my jolly UPS Delivery man, ( I'll name him Ken), So Ken passes me my parcel and I quickly Slammed my door in his face, My heart was beating so fast, Ken said Goodbye from behind my glass door, I partially waved him off I was so excided and for good reason too. I'm not a big fan of "Anti" Kink on the tubes, but up close in person, it looked and felt ok, The tubing is dark and shiny, not a fan of the shiny stuff, But then I seen the Cpu Block and it was as if the clouds had lifted and all the Gods sang all at once, The block is absolutely Huge, (That's what she said) I'm 6f 2"in and my hands are big enough and the block is as big as my clenched fist, the solid copper Bottom cold plate is a least a inch bigger all round than any AIO I have ever used, when you hold it, it feel like quality, you know this is something special, the block as a window on the side so you can see the pump impeller inside working, on top there is a fill port so you can add some dye or if you want to expand you can do so, it takes stander fitting size of 1/4inch if want to change them you can, The Radiator Fins are also made out of Copper which probably dissipates thermal heat better than most alloys, The pump block requires no software to run, just a simple 3pin fan connector and ya golden. Here's the best bit, when I use a new AIO for the first time I do what's called a Bios Automatic OC, normally I would get at most a 14% OC, BSCK at 100 taking my 7700k to 4.6 to 4.7ghz Depending on my room temps, The Eisbaer cooling is so efficient that after I ran the cooler for 2 hours to heat cycle it I did the Auto OC and got a !7% oc to 4.944ghz with BSCK at 103.25 , I normally manually OC my cpu to 5GHZ, This AIO not only nearly matched my OC but it managed to do this with less voltages too, Keeping me under 1.300v, where normally manually I would have to input at least 1.310 to get stable at 5ghz, So I was curious, could I make this Auto OC run at 5ghz, I turned up the Base clock to reach 5ghz , and F10, it fired up straight away and the voltages didn't increase at all. This AIO punches way above its weight, and can compete with the custom loops, The Fans that come with it don't feel cheap, they are really quiet at Idle and at full tilt you can hear them, but once you get gaming you soon forget there even there. The AIO comes with Mounting brackets for the latest CPU line up, including Ryzen, I would say that the Solid copper cold plate is actually big Enough to Cover Ryzen ThreadRipper completely, If want the custom loop but cant afford the price tag, then look no further. You can add the Matching GPU AIO cooler that AlphaCool do, And plumb it straight into the Eisbaer 360, so in affect, you can have a dual pump system with 2 radiators and 2 pumps and if one of them pumps was to fail, you probably wouldn't even notice as the other pump was made strong enough to handle 2 radiators in the first place, that is a good redundancy to have, which mean you can still game on or finish that important presentation or Edit that video before you need to repair or replace the failed pump, Or you can just buy the pre-filled gpu block with no rad and plum straight into the Eisbaer 360. So you pay less, than other leading brands, its way more efficient, and its modular, I gotta ask, What ya'll waiting for. I highly recommend it.
Immagini presenti nella recensione
