Brand | Corsair |
---|---|
Power Connector Type | 3 and 4 pin Combo |
Cooling Method | Water |
Compatible Devices | Radiator |
Noise Level | 31.4 dB |
Material | Ceramic,Copper,Nickel |
Maximum Rotational Speed | 2000 RPM |
Item model number | CW-9060015-WW |
Item Weight | 1.1 pounds |
Product Dimensions | 10.4 x 5.66 x 8.34 inches |
Item Dimensions LxWxH | 10.4 x 5.66 x 8.34 inches |
Manufacturer | Corsair |
ASIN | B00FZHWFEW |
Is Discontinued By Manufacturer | No |
Date First Available | October 20, 2013 |
CORSAIR Hydro Series H75 AIO Liquid CPU Cooler, 120mm Radiator, Dual 120mm PWM Fans
Brand | Corsair |
Power Connector Type | 3 and 4 pin Combo |
Cooling Method | Water |
Compatible Devices | Radiator |
Noise Level | 31.4 dB |
Material | Ceramic,Copper,Nickel |
Maximum Rotational Speed | 2000 RPM |
About this item
- 25mm thick radiator core (29mm including housing) for enhanced compatibility with small cases
- Copper micro fin cold plate with high quality, quiet ceramic bearing pump
- Easy to use tool-free black nickel finish mounting brackets for modern CPUs
- Dual SP120L PWM fans for great performance and adjustable noise levels
- Fan Speed 2000 RPM (+/- 10%)
- Speed: 2000 RPM
Featured items you may like
- Amazon Basics Computer Cooling Fan with Cooler Master Technology, CPU Air Cooler, 4 Heat Pipes, RGB LED PWM, Aluminum FinsAmazon's Choicein Computer CPU Cooling FansFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Tuesday, Apr 2
- NZXT Kraken 240 - RL-KN-240-B1 - 240mm AIO CPU Liquid Cooler - Customizable 1.54" Square LCD Display for Images, Performance Metrics and More - High-Performance Pump - 2 x F120P Fans - BlackAmazon's Choicein Water Cooling SystemsFREE Shipping by AmazonGet it as soon as Tuesday, Apr 2
- ID-COOLING FROSTFLOW X 240 CPU Water Cooler AIO Cooler 240mm CPU Liquid Cooler White LED 2x120mm PWM Fans, Intel 1700/1200/115X, AMD AM5/AM4FREE Shipping by AmazonGet it as soon as Tuesday, Apr 2
Compare with similar items
This Item CORSAIR Hydro Series H75 AIO Liquid CPU Cooler, 120mm Radiator, Dual 120mm PWM Fans | Recommendations | dummy | dummy | dummy | dummy | |
Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | ||
Price | Currently unavailable. | -16% $75.99$75.99 List: $89.99 | $74.99$74.99 | -19% $228.00$228.00 List: $279.99 | $79.99$79.99 | $139.00$139.00 |
Delivery | — | Get it as soon as Tuesday, Apr 2 | Get it as soon as Tuesday, Apr 2 | Get it as soon as Tuesday, Apr 2 | Get it as soon as Tuesday, Apr 2 | Get it as soon as Tuesday, Apr 2 |
Customer Ratings | ||||||
Mounting system | 4.4 | 4.1 | 4.1 | 4.1 | 4.1 | 4.2 |
Noise level | 4.2 | 3.9 | 3.9 | 4.2 | 4.5 | 3.9 |
Easy to install | 4.2 | 4.1 | 4.1 | 4.0 | 3.7 | 3.9 |
Value for money | — | 4.3 | 4.3 | 3.9 | 4.1 | 3.7 |
Sold By | — | Amazon.com | Amazon.com | Amazon.com | Amazon.com | Amazon.com |
cooling method | Water | Water | Water | Water | Water | Water |
power connector type | 3 and 4 pin Combo | 4-Pin | — | 3-Pin | — | 4-Pin |
compatible devices | Radiator | Radiator | Desktop | Radiator | Radiator | Radiator |
air flow capacity | — | 78.73 cubic feet per minute | 78.73 cubic feet per minute | 82.27 cubic feet per minute | 47.73 cubic feet per minute | — |
max rotational speed | 2000 rpm | 2000 rpm | 2500 rpm | 0 rpm | 1500 rpm | 2400 rpm |
noise level | 31.4 decibels | 18 decibels | 18 decibels | 20 decibels | 28 decibels | 31.5 decibels |
material | Ceramic,Copper,Nickel | Ceramic | Aluminum, Plastic | — | Copper | Copper |
From the manufacturer
Slim 25mm radiator and dual PWM fans for liquid CPU cooling
Hydro Series H75 provides effective and efficient liquid CPU cooling in a compact size. The 120mm radiator has a thickness of only 25mm and is paired with standard diameter, kink-resistant tubing for compatibility with smaller cases and tighter spaces. The dual SP120L 120mm fans support PWM motherboard fan headers, so your motherboard can automatically control fan speeds based on CPU temperature. The tool-free mounting system has broad Intel and AMD socket compatibility. A copper microfin coldplate and high-quality ceramic bearing pump help provide reliable, low-noise heat transfer away from your CPU. And, like all Hydro Series liquid CPU coolers, Hydro Series H75 is completely self-contained and never needs filling or maintenance.
Features:
|
|
|
---|---|---|
Copper microfin coldplateThe coldplate draws heat from your CPU into the circulating liquid. Copper has outstanding thermal conductivity, and the microfin design provides fast and efficient heat transfer. |
25mm x 120mm radiatorThe 25mm thickness combines ample cooling surface area with a low-profile size that’s ideal for smaller cases or any installation where space is at a premium. |
Dual high-torque 120mm PWM fansDual fans mount on opposite sides of the radiator for high-speed push-pull airflow. You can connect them to the standard PWM fan headers on your motherboard for precise fan speed control, and select the exact level of cooling performance you need. |
|
|
|
---|---|---|
Broad Intel and AMD socket compatibilityHydro Series H75 works with virtually all current Intel and AMD based motherboards. |
High quality ceramic bearing pumpThe reliable pump mechanism is designed for silence. |
Tool free bracket installationAll mounting hardware is included. Installation is simpler and you don’t need to go hunting for a screwdriver. |
Product information
Technical Details
Additional Information
Customer Reviews |
4.5 out of 5 stars |
---|---|
Best Sellers Rank | #2,954 in Computer CPU Cooling Fans |
Warranty & Support
Feedback
Looking for specific info?
Product Description
General
Block
Radiator
Fan
Features
Package Contents
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the quality, ease of installation, and value of the electronic component fan. For example, they mention it performs well, is effective, and easy to install. Some appreciate the appearance and value. That said, opinions are mixed on noise, fit, and performance.
AI-generated from the text of customer reviews
Customers like the quality of the electronic component fan. They mention it's affordable, effective, and helpful in GPU cooling. Some say that it'll cool an fx 9590 flawlessly. Overall, most are satisfied with the performance and functionality of the product.
"...if you're looking for an all in one monitoring solution , but it's certainly effective and once you set your Profile (named configuration) it is..." Read more
"...It's been really helpful in GPU cooling. They both feature their own fans and heat pipes, but they're stacked making them choke a bit for air...." Read more
"...the radiator, with the heatsink tightly packaged and had a very sturdy construction the tubing was quite thick and reassured me in my fear of leaks...." Read more
"...The fans are running much quieter and the cooler temperature stays at a reasonable level. Problem solved...." Read more
Customers like the ease of installation with the electronic component fan. They mention that the mounting instructions are ok, the pictures speak a thousand words, and the online tutorial is pretty straightforward. They also say that the cold plate and radiator come ready to install, and that the Corsair link software is easy to use. Customers also mention that it's simple to add a PWM hub to control additional fans.
"...Installation is actually easier than a big air cooler because you don't have install a custom back plate on your motherboard - unfortunately for me..." Read more
"...This user-tunable self-preservation is downright incredible...." Read more
"...In conclusion to this essay the corsair h115i is a great aio. Easy installation, excellent performance, cool, and quiet with customizable rgb..." Read more
"...With a little elbow grease, the install is pretty simple. The pre-applied paste works.The cable connections are typical Corsair...." Read more
Customers like the value of the electronic component fan. They say it's a great price for a good product, and money well spent. They also say it has a high price over performance ratio and is a bargain cooler for general everyday applications. Overall, customers are satisfied with the value and quality of the product.
"...it was a good choice and I'd recommend it to anyone looking for a inexpensive, simple, yet effective liquid cooling solution." Read more
"...I thought the price was quite reasonable as well. I'd even argue budget rigs should run this cooler...." Read more
"...The price was also $27 (plus tax) lower. The H110i also had the lowest number of negative reviews...." Read more
"...Overall, I'd definitely recommend this to anyone wanting an affordable cooler that performs well...." Read more
Customers like the appearance of the electronic component fan. They say it looks super cool, has an innovative, cutting-edge design, and the braided cooling lines are sharp looking. The RGB is a nice touch, and it really cools. The radiator has some nice Corsair branding along the sides to make it look different from the rest. The self-contained design of the H115i allows you to still have some fun with it, and is awesome.
"...of space on my mobo, and in conjunction with my aio gpus look nice and sleek, whereas before all my cords were stretched to the limit to go over and..." Read more
"...If you're looking for a well-rounded AIO kit that looks pretty sweet, definitely add this to your list of potentials!" Read more
"...Other than that this product does a really good job and looks super cool...." Read more
"...The flexible cooling hose were easy to install, and look nice in person than it does in the picture...." Read more
Customers are mixed about the noise of the electronic component fan. Some mention that it's extremely quiet, while others say that it makes an audible whirling sound. The fans also tend to rattle when they're climbing up to speed. Overall, opinions are mixed and there are a few annoying issues with the fan.
"...It's quiet (for what it is) and keeps the CPU impressively cool, even when gaming at true 4K ultra and with an Oculus Rift...." Read more
"...Sound is almost unnoticeable, if I pay attention I can hear an audible whirling sound but nothing that would at least Imo distract from any gaming..." Read more
"...The caveat is these fans when climbing up to speed are noisy and tend to rattle until they settle down...." Read more
"...That is, the cooler liquid temperature. The fans are running much quieter and the cooler temperature stays at a reasonable level. Problem solved...." Read more
Customers are mixed about the fit of the electronic component fan. Some mention it's small enough to fit in just about any case, while others say that it'd not properly fit with their case or motherboard. The tubes are the perfect length and the radiator is massive. However, some customers also mention that the fan is too wide to fit with the Corsair Dominator Platinum and the motherboard is slightly too big.
"...I tried the thermaltake amd back plate but that was not compatible with the Amd Standoffs that came with with the Corsair...." Read more
"...The Link is a small UI you download that gives you insight into all kinds of fantastic nerd fun and data for your system...." Read more
"...The chassis is a big heat sink itself and the heat is exhausted upward instead of out the back so this might account for the 5 degrees..." Read more
"...off, I saw no increase in temps compared to the phantec, it freed up tons of space, looks nice and "cool" especially the rgb led lights...." Read more
Customers are mixed about the performance of the electronic component fan. Some mention that the performance is really good, and along with the unique advantages of closed loop, the settings are performance, balanced or quiet. It's very efficient and can be set to balanced. However, others say that the fans are not at full speed, the pump speed management sucks, and it tops at 2000 rpm and generates a lot of noise.
"...Installation itself was surprisingly easy and not as stressful as I anticipated, and compared to the phantec much easier...." Read more
"...as 2 of my 5 motherboard fan headers ghosting, and their fan speeds not being reported, which otherwise would of been a nice feature, but that is..." Read more
"...Corsair's Link software is a plus for me. It can control the speed of the fans based on several temperature monitoring settings..." Read more
"...The settings are performance, balanced or quiet....I have mine set to balanced unless I game...." Read more
Customers are dissatisfied with the accessories that come with the electronic component fan. They mention that the mounting hardware was missing, and some of the hardware was covered with dust. Some customers also report that the cooling kit does not include the bracket for AMD installation.
"...I can't give this item 5 stars because they don't include a AMD Back plate. How hard is it to include a stupid back plate...." Read more
"...superb but it comes with an unnecessarily noisy fan and a skimpy amount of accessories...." Read more
"...This being my fist water cooler, I was unaware that the pre-installed bracket was removable, as I did not have to remove it for my Intel 6800k...." Read more
"...or failing.... and mine came with the pumps, heat sync, and radiator completely missing!!!..." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Installation is actually easier than a big air cooler because you don't have install a custom back plate on your motherboard - unfortunately for me I had take an aftermarket back plate off and install the original back plate to use the H110i. Then find a place to hang the radiator which fit perfectly in the top of the Stryker case by just removing the 200mm top exhaust fan. Note: The Screws provided with the H110i are round heads which interfere with the top screen movement (for cleaning) on a Stryker/Trooper case , but I'm using it as exhaust, otherwise I'd have to find replacement flat head screws.
There are 3 ribbon cables coming out of the water block pump head, one SATA power to energize the pump and fans, the next two flat ribbons are for the two 140mm PMW 2100rpm Corsair SP fans. Note: These fans are 5-700 rpm faster than any of the 140mm fans Corsair distributes to retailers, but they are for sale at Corsair's site as H110GT replacement fans - the only 2100rpm 140mm Corsair sells at this time.
A fourth cable with a single wire plugs into the 3-4 pin CPU fan header for the pump rpm signal.
There's a fifth unattached cable that plugs into a USB receptacle in the pump head and the other end to one of your motherboard's USB headers for using the LINK software. It is not attached permanently like the other cables I assume because the Link software is optional since the H110i will work without it, but if you want a fan configuration other than the default you need to connect it and use the Corsair Link at least until your configuration is complete. Optionally of course you can connect your fans to a fan controller or control using available motherboard headers.
The first thing I noticed when I powered the unit on the first time was a revving up and down of the fans every few seconds which became annoying since the fan rpm's kept going up and down like a kid twisting then dropping throttle on his new 2 stroke motor bike outside your window. So, without panic I decided to familiarize myself with the Corsair Link Software to see if I could fix this revving up and down problem.
I found that the Profile my H110i was configured in out of the box was based upon CPU Package Temperatures. If you were to put the CPU package on a graph it almost looks like a EKG graph (heart monitor) with an AMD FX CPU such as the 9590 because it can vary widely ( amplitudes and intervals) since the package data cycles through the 8 cores every few tics of the clock and some core temps can differ by 10 degrees or more which if the difference temps between cores are on two different sides of the fan curve that means the firmware is constantly telling the fans to speed up and then slow down with every other tic of the clock.
To resolve the revving issue I immediately set my fans to spin at a fixed RPM temporarily and it worked. Then I setup profiles of each speed and tested the speeds at different cpu loads to see how each speed effected the cooling and how much noise they made while doing so in preparation to mapping a fan curve configuration for my needs. I've had it a month and I'm still tweaking it a bit.
I will say that these high rpm fans definitely make this AIO better in performance as at high loads the higher speeds make a difference. With all cores at high load my 9590 stays in the 50's if I allow the fans to ramp up to 1400-2100rpm as needed - otherwise If they are run quiet which is <1300rpm my temps will climb past sixty which I wouldn't want. The caveat is these fans when climbing up to speed are noisy and tend to rattle until they settle down. I would not change them to common SP <1500 fans with a hot cpu like the 9590, but I think I see some Noctua SSO2 Bearing Fan Retail Cooling NF-A14 iPPC-3000 PWM fans in my future.
It took some time to find a fan speed to keep my 9590 idle temperatures stable - BTW I have the 9590 locked at 4.91 GHz, slightly below its 5GHz Turbo rate. I found that a moderately quiet fan rpm setting of about 1000 rpm's keeps my 9590 CPU in the mid to upper 30's depending on ambient start up air temperatures and the H110's coolant temperature (2 hours into its startup today it's sitting at 35C while both surfing and editing this review). After a full load of an hour or more then back to light use the CPU idle temperature tends to settle at about 39-40C since the coolant temps are higher. I expect the temps will go up a bit during the summer heat, but for now I'm more than satisfied with the temperatures while using the H110i. I also tested the H110i with my FX-6300 and it idles at much cooler temperatures that ranged about 26-27 and stayed the 40's when at full load with an occasional rare bump to 50-51C.
As much as I've read complaints about the Link Software, I can tell you that it isn't perfect especially if you're looking for an all in one monitoring solution , but it's certainly effective and once you set your Profile (named configuration) it is locked into the 110i's firmware - so you can unplug the USB and never start the Link software again once you're satisfied with your configuration. While the Link is stable, there are issues such as 2 of my 5 motherboard fan headers ghosting, and their fan speeds not being reported, which otherwise would of been a nice feature, but that is really not why I bought the H110i for a cooling solution.
Setting up Profiles - there are two (2) pump speeds and either speed can be attached to any of your named Profiles. The pump speed can be set to adjust at a specified temperature, but I made it simple and left them on high for all configurations since there is no discernible noise at either speed. There are 8 modes Default, Quiet, Balanced, Performance, custom, fixed %, fixed rpm and Max. In each Profile the modes can be set to each individual fan lead (2), you can copy them over to the other for identical settings or you can alter them if that fits your needs. For example if you had a push pull setup, you could put the top pull fans on one channel and the bottom two on another in case you needed to make the pull side slightly faster to make them more efficient.
There are 5 speed/temperature mapping points on the graph you can base fan curve upon attached to one of the following (7) groups. MB Socket, MB Motherboard, MB Temp#3, CPU Package, HD/SDD Temp, GPU Temp & H10i coolant temp. I created and named at least a dozen custom configurations with the link software some at fixed speeds for specific tasks and some custom curves for most everyday use.
Lastly each device being monitored has a Notification tab available by clicking the item that allows an optional action to be performed should a monitored temperature or fan speed fall outside the range specified. Those actions can be shutting the system down at a specified time interval, energizing RGB features, running an executable file, or ramping up fans 100%.
Did I mention the Corsair logo is and illuminated RGB LED and can be configured in the Link? Well I did now and yeah that's nice and might compel one to consider H110i over an identical AIO that has no LED.
Even though there's room for improvement with the vibrations of the fans while ramping up >1300 rpm and the lack of a complete monitoring solution (ghosting of other system components) with the link software, the bottom line after a month into using the H110i I'd say it was a good choice and I'd recommend it to anyone looking for a inexpensive, simple, yet effective liquid cooling solution.
GO ON, I HAVE A MINUTE
I'm one that's ascribed to the theory that water-cooling both scares the heck out of me and is pretty awesome. This cooler's made for people like me. I did a lot of research prior and was sold on its closed-loop design. Since it's a sealed system there's little I can break or jack up. Secondly, Corsair sold me on its warranty -- if this thing leaks on your components they'll replace said components "on a case-by-case basis". I could be wrong and hope to never test the "case-by-case" language, but my guess is that if you're using it as designed, they've got you covered. I thought the price was quite reasonable as well. I'd even argue budget rigs should run this cooler.
All of this is on the following build:
- Intel i7 6700k (4.0GHz, not OCed at the moment)
- 2 x Radeon R9 390s @ 8 GB ea
- 2 x 8 GB Corsair Dominator DDR4 3000 RAM
- Full ATX Tower (Rosewill Nighthawk)
- Asus Z170A Motherboard
- Generally gaming at either true 4k (4096x2160) or on an ultrawide (3440x1440) at ultra everything. This also runs an Oculus Rift at "best" (or equivalent) settings, depending on the game. Room temp is generally between 70-75 deg F depending on the day, time, season, weather, etc.
PERFORMANCE
To run the rig at full-tilt, I do keep the cooler at its "performance" setting using the predefined Corsair Link system (which I'll get to later). At idle, this cooler does such a fantastic job that the CPU temp is laughable -- it's generally never breaking a sweat and stays at room temp (20-22 deg C).
When fully under load and after heavy gaming (5-6+ straight hours), it's even more impressive. I like to watch high temps -- as those are the ones that kill -- and the CPU still comes in around 67-68 deg C with a water temp of about 38 deg C. I think the hottest I've ever seen it is 72 deg C, and that was with the GPUs registering 82 deg C and the system set to "balanced". The amount of heat transfer and dissipation that happens between "balanced" and "performance" is incredible.
As for noise, it's surprisingly quiet given the size and ridiculousness of this setup. It does have a bit of a sporadic fan when doing non-gaming activities, seemingly increasing fan and pump speed at the threat of thinking. It's noticeable, but more so when you're doing non-gaming stuff that isn't placing a persistent load on the system. With headphones on, I can't hear it.
CORSAIR LINK
I am so in love with this, that I wanted to give it its own sub-section. I've always been a fan of Corsair products but this is extremely delicious icing on the cake. The Link is a small UI you download that gives you insight into all kinds of fantastic nerd fun and data for your system. From this, you can get the aforementioned high temps of components, look at graphs of pump speed, fan speed, etc and even adjust them. Most awesomely, this gives you some control over how to handle overtemp alarms.
While my particular system isn't overclocked yet, it likely will be one day, and that's where things can go haywire. The Corsair Link system lets you set min/max alarms and actions. For instance, you can set a max value of 85 deg C. When CPU temps reach it, it can turn its LEDs red and turn all fans to 100%. Then you can even tell it to shut itself down or run files to throttle. This user-tunable self-preservation is downright incredible.
My only minor grievance here is that components using the Link system use one of the motherboards USB headers. Had I known this before, I likely would have picked one that has a few extras but I didn't. I'm now warning you all. With the Hydro and the PSU both having this feature, I'm out of USB 2.0 headers and lost the front plugs on my CPU case. It's not earth-shattering but if you're buying a new mobo as well, something to account for.
OTHER THINGS I'VE LEARNED
Corsair had a bizarre way of stating their recommended fan position so I decided to place it so it was sucking external air through the radiator and into the case. I'm still not sure if this is what they meant, but it seems to be doing a fantastic job. The massive dual fans seem to create overpressure that the exhaust fan quickly takes advantage of. It's been really helpful in GPU cooling. They both feature their own fans and heat pipes, but they're stacked making them choke a bit for air. Purely as an experiment, I gamed with the case open and closed. The GPUs run about 6 deg C cooler with the case closed. The fans have a little arrow to identify airflow direction as well.
This radiator is thick and massive. That makes it perform extraordinarily well, just be sure the case can support it. This is more aimed at non-full-tower cases since full towers are ridiculously huge and can fit just about anything you can think of.
Top reviews from other countries
Iniziamo con l'installazione, che è stata sorprendentemente semplice. Il kit incluso nel pacchetto ha tutto il necessario per montare correttamente il cooler sul mio processore. Le istruzioni fornite sono state chiare e facili da seguire, anche per chi come me non possiede particolari competenze tecniche.
Il Corsair Hydro H60 è dotato di un radiatore da 120 mm, che si adatta facilmente alla maggior parte dei casi del computer. La ventola inclusa, la SP120 PWM, è altamente efficiente nel raffreddare il processore in modo silenzioso. Ho notato una significativa riduzione delle temperature, specialmente durante le sessioni di lavoro intense o nei momenti di overclocking.
La qualità costruttiva del Corsair Hydro H60 è davvero eccellente. Il design compatto e la pompa silenziosa assicurano una miscelazione efficiente del liquido di raffreddamento e un flusso costante. Inoltre, la finitura nera del sistema si adatta perfettamente all'estetica del mio computer.
Un altro aspetto positivo di questo Cooler è la sua durata nel tempo. Dopo diversi mesi di utilizzo intensivo, non ho riscontrato alcun problema di perdite o malfunzionamenti. Corsair ha dimostrato di offrire prodotti affidabili e di alta qualità.
È importante notare che, come la maggior parte dei sistemi di raffreddamento liquido, il Corsair Hydro H60 richiede un po' di manutenzione periodica per mantenere le prestazioni al massimo. Tuttavia, questa è una pratica comune e vale sicuramente la pena per il miglioramento significativo delle temperature.
In conclusione, il Corsair Hydro H60 All-in-One Liquid CPU Cooler è un'ottima soluzione di raffreddamento liquido per il processore. Facile da installare, silenzioso ed efficiente nel raffreddamento, questo cooler offre prestazioni superiori per mantenere il mio processore al fresco durante le sessioni di gioco o di lavoro. Consiglio vivamente questo prodotto a tutti coloro che cercano una soluzione di raffreddamento efficace per il loro computer.
Me parece una excelente opción. Si tu presupuesto es bajo y quieres un buen cooler líquido.
Recomendado
Installation was easier than I thought it would be, I didn't even have to take the MB out of the case, just clean off the silver from the processor and clamp on the new pump. The fan is operating as a push and strapped to the CPU for that to act as a pull fan.
Heat loads plummeted immediately, after an hour or so finally breaking 50 degrees. This let me push the voltage a little further and still be stable. I'm aware that AICs will stay warmer longer, but if it spends an extra hour at 50 degrees instead of getting above 60 for thirty minutes I'm more than okay with the tradeoff.
Cons: As others have mentioned, don't torque the screws too tight, the fan frame can deflect the blades and cause noise.
Other Thoughts: I'd do this again in a heartbeat, cooling has paid off marvelously and I expect to keep using this unit in the future with any new processors as well.